Welcome to the Avmark Systems Panasonic Broadcast & Pro-Video Website
                         
 
 

 

                                                         Go Back to AJ-HD1200A Products Page

 VIDEO RECORDERS & PLAYERS:  AJ-HD1200A - SPECIFICATIONS

General
Power Supply: AC (100-240) V ±10%, 50 to 60 Hz
Power Consumption: 97W
Operating Temperature: 41 °F to 104 °F (5°C to 40°C)
Operating Humidity: 10% to 85% (non dew)
Weight: 18.1 lbs (8.2 kg)
Dimensions (WxHxD): 8-1/2" x 5-3/16" x 16-15/16" (214 x 132 x 430 mm)
Recording Format: DVCPRO HD-LP
Recording Video Signal: 1080i/59.94Hz, 1080i/50Hz, 720p/59.94Hz (switchable)
720p/60Hz (Varicam)
Recording Audio Signal: 48 kHz, 16 bit, 8 CH
Recording Track: Digital Video:1080i/720p
Digital Audio:8 channels
TC:Subcode area
Cue:1 longitudinal track
CTL:1 longitudinal track
Tape Speed: 67.64mm/s
Rec/Play Time: Max. 92 minutes with AJ-HP92ELG
Tape: 1/4" metal particle
FF/REW Time: Approximately 2 minutes with AJ-HP92ELG
Video
Sampling Frequency: Y: 74.25/1.001 MHz, Pb/Pr: 37.125/1.001 MHz
Quantization: 8 bits
Compression Method: DCT + Adaptive quantization
Compression Ratio: 1/6.7
Error Correction: Reed Solomonn Product Code
Bit Rate: 100 Mbps
Audio
Channel: 8 channels
Sampling Frequency: 48kHz
Quantization: 16 bits
Frequency Response: 20Hz to 20kHz, ±1.0dB (reference level)
Dynamic Range: More than 85dB (1kHz, emphassis off, "A" weighted)
Distortion: within 0.1% (1kHz, emphassis off, reference level)
Cross Talk: Less than -80dB (1kHz, between any 2ch)
Wow & Flutter: Below measurable limit
Headroom: 20dB (AJ-HD1200AP) / 18dB (AJ-HD1200AE)
Video Input
HD SDI (option*1): BNC x 1, SMPTE 292M/296M
Reference (option*1): BNC x 2 (loop-through), 75 On/Off
SD (analog composite) /HD (tri level sync) Auto switching
Video Output
HD SDI (option*1): BNC x 2, SMPTE 292M/296M
SD SDI (option*1): BNC x 1, SMPTE 259M-C
HD Component: BNC x 3, Y/Pb/Pr, R/G/B switchable
SD Composite: BNC x 2, Video1, Video2 (superimpose on/off)
Video Output Adjustment Range
HD SDI: (option*1) ±0.5H (±1100 Sample, 13.5ns step)
SD SDI Composite: (option*1) ±0.5H (±858 Sample, 37ns step)
Compsite SC: ±180°
Audio Input
Analog (option*1): XLR x 4 (CH1/2/3/4), +4/0/-20/-60 dBu (3k) switchable, 600/high-impedance switchable
HD SDI (option*1): SMPTE 299M embedded audio (BNC x 1, 75)
Audio Output
Analog: XLR x 4 (CH1/2/3/4), CH3/4 switchable for Monitor Out (L/R)
+4/0/-20 dBu switchable, 600/high-impedance switchable
HD SDI (option*1): SMPTE 299M embedded audio (BNC x 2, 75)
SD SDI (option*1): SMPTE 275M-A embedded audio (BNC x 1, 75)
Phones: M6, variable level control, 8
Others
DIGITAL (option*2): 6 pin x 1, IEEE 1394, DVCPROHD, DVCPRO50/DVCPRO/DV
TC IN: BNC x 1, 0.5 to 8.0 Vp-p, 10k (option)
TC OUT: BNC x 1, low-impedance, 2.0 ±0.5 Vp-p
Remoto Control: D-sub 9 pin, for AJ-A95, RS-422A Interface
DC IN: 4 pin x 1, DC12V
DC OUT: DC12V, 250mA, for AJ-A95
Option*1: AJ-YA120AG HD-SDI Input/Output and SD-SDI Output Board
Option*2: AJ-YAD120AG IEEE 1394 Interface Board

Weight and dimensions shown are approximate.
Features and specifications are subject to change without notice.
These products may be subject to export regulations.
  Home | About Us | Products | Contact Us
      Site Designed and Maintained by Cyberstorm Website Design