| General |
| Power Requirement: |
AC 100 V to 240 V ±10 %, 50 to 60 Hz |
| Power Consumption: |
110 W |
| Operating Temperature: |
5 °C to 40 °C (non dew) |
| Operating Humidity: |
10 % to 80 % |
| Weight: |
15.0 kg |
| Dimensions (WxHxD): |
424 x 175.2 x 430 mm |
| Recording Format: |
DVCPRO/DV |
| Recording Video Signal: |
625i |
| Recording Audio Signal: |
48 KHz 16 bits 2 CH (DVCPRO) |
| Recording Track: |
Digital Video, Digital Audio; Helical Track
TC; Sub code area
Cue; 1 track CTL; 1 Track |
| Tape Speed: |
33.854 mm/sec. |
| Recording/Playback Time: |
Max. 184 min. (AJ-5P92LP)
Max. 66 min. (AJ-P66MP) |
| Tape: |
Metal Particle |
| FF/REW Time: |
Less than 3 min. (with AJ-5P92LP)
Less than 2 min. (with AJ-P66MP) |
| Digital Slow Motion: |
-0.43 to +0.43 +0.5 +0.75 (DVCPRO) |
| Editing Accuracy: |
±0 frame (TC) |
| Tape Timer Accuracy: |
±1 frame (CTL) |
| Servo Lock Time: |
Less than 0.5 sec. (colour framing/standby
ON) |
| Video |
| Sampling Frequency: |
Y; 13.5 MHz, PB/PR; 3.375 MHz (DVCPRO) |
| Quantization: |
8 bits |
| Compression Method: |
DV-Based Compression (SMPTE314M) |
| Compression Ratio: |
1/5 (DVCPRO) |
| Error Correction: |
Reed Solomonn Product Code |
| Bit Rate: |
25 Mbps (DVCPRO) |
| Digital
In (Option)/Analogue Component Out |
| Bandwidth: |
Y; 25 Hz to 5.75 MHz (±0.5 dB)
PB/PR; 25 Hz to 1.3 MHz (±0.5 dB)
1.5 MHz (-5 dB) |
| S/N: |
60 dB or more (Y) |
| K Factor: |
1% or less (Y 2T) |
| Analogue
Component In/Analogue Component Out |
| Bandwidth: |
Y; 25 Hz to 5.5 MHz (±1.0 dB), 5.75 MHz (-2.0
dB)
PB/PR; 25 Hz to 1.3 MHz (±1.0 dB)
1.5 MHz (-5 dB) |
| S/N: |
55 dB or more |
| K Factor: |
1% or less (Y 2T) |
| Y/PB, PR Delay: |
20 nsec or less |
| Analogue
Composite In/Analogue Composite Out |
| Bandwidth: |
Y; 25 Hz to 4.5 MHz (±1.0 dB), 5.75 MHz (-3.0
dB) |
| Y/C Delay: |
20 nsec or less |
| Processor
adjustment range (Video Out) |
| Video Gain: |
±3 dB |
| Chroma Gain: |
±3 dB |
| HUE: |
±30  |
| Black Level: |
±100 mV |
| Sync phase: |
±15 µ sec. |
| SC phase: |
±180 |
| Audio |
| Sampling Frequency: |
48 kHz (sync. With video) |
| Quantization: |
16 bits |
| Frequency Response: |
20 Hz to 20 kHz ± 1.0 dB (reference level) |
| Dynamic Range: |
More than 90 dB (1 kHz, emphasis off, "A"
weighted) |
| Distortion: |
within 0.05 % (1 kHz, emphasis off, reference
level) |
| Cross Talk: |
Less than -80 dB (1 kHz, between 2channels) |
| Wow & Flutter: |
Below measurable limit |
| Headroom: |
18 dB |
| De-Emphasis: |
T1 = 50 µsec, T2 = 15 µsec (ON/OFF Auto) |
| Cue Track: |
300Hz to 6KHz, +3/-5dB |
| Video
Input |
| Analogue Component: |
BNC x 3 (Y,PB,PR)
Y; 1.0Vp-p, 75
PB/PR; 0.7Vp-p, 75
(100% colour bar) |
| Analogue Composite: |
BNC x 2, loop-through, 75 On/Off
Video: 1.0Vp-p, 75 |
| Reference: |
BNC x 2, loop-through, 75 On/Off |
| SDI (option): |
BNC x 2, Active-through
ITU-R BT.656-4 |
| SDTI (option): |
BNC x 2, Active-through
SMPTE 305M/321M |
| Video
Output |
| Analogue Component: |
BNC x 3 (Y,PB,PR)
Y; 1.0Vp-p 75
PB/PR; 0.7 Vp-p, 75
(100% colour bar) |
| Analogue Composite: |
BNC x 3
Video1/Video2:Video/WFM switchable
Video3: Super On/Off |
| SDI (option): |
BNC x 3 ITU-R BT.656-4
SDI1, SDI2, SDI3: Super On/Off |
| SDTI (option): |
BNC x 1
SMPTE 305M/321M |
| Audio
Input |
| Analogue: |
XLR x 2, 600 /high-impedance
switchable
+4/0/-20 dBu |
| Digital: |
BNC x 1, AES/EBU |
| SDI (option): |
BNC, 75 , ITU-R
BT.656-4 |
| Audio
Output |
| Analogue (CH1/CH2): |
XLR x 2, low-impedance
+4/0/-20 dBu switchable |
| Digital (CH1/CH2): |
BNC x 1 AES/EBU, 1.0 ±0.2 Vp-p, 75 |
| SDI (option): |
BNC, 75 ITU-R
BT.656-4 |
| Monitor: |
XLR x 2, low-impedance
+4/0/-20 dBu switchable |
| Headphone: |
M3, variable level control, 8 |
| Others |
| IEEE 1394 (option): |
6pin x 1, IEEE 1394-1995 |
| Time Code Input: |
XLR x 1, 0.5 to 8 Vp-p, 10 k |
| Time Code Output: |
XLR x 1, 2.0 ±0.5 Vp-p
low-impedance |
| RS-422A Input: |
D-sub 9 pin RS-422A I/F |
| RS-422A Output: |
D-sub 9 pin RS-422A I/F |
| RS-232C: |
D-sub 25 pin RS-232C /F |
| Parallel IN/OUT: |
D-sub 25 pin |
| Encoder Remote In: |
D-sub 15 pin |
