Go Back to AJ-SD955B Products Page

 VIDEO RECORDERS & PLAYERS:  AJ-SD955B - SPECIFICATIONS

General
Power Supply:	AC100 to 240V ±10%, 50 to 60 Hz
Power Consumption:	120W (full operation)
Operating Temperature:	5°C to 40°C
Operating Humidity:	10% to 80% (non dew)
Weight:	14.9 kg (AJ-SD930B) 15.0 kg (AJ-SD955B)
Dimensions (WxHxD):	424 x 175.2 x 430 mm
Recording Format:	DVCPRO50/DVCPRO switchable
Video Format:	AJ-SD930B: 625i AJ-SD955B: 625i/525i switchable
Recording Track:	Digital Video:625/50i Digital Audio:4 channels (DVCPRO50) 2 channels (DVCPRO) TC:Subcode area Cue:1 longitudinal track CTL:1 longitudinal track
Tape Speed: (DVCPRO50)	625i:67.708mm/s 525i:67.640mm/s (AJ-SD955B)
Rec/Play Time:	Max. 92 minutes (*Based on AJ-5P92LP cassette)
Tape:	metal particle
FF/REW Time:	Less than 3 minutes with AJ-5P92LP
Digital Slowmotion:	-0.43x to +0.43x, +0.5x, +0.75x (DVCPRO50,DVCPRO)
Editing Accuracy:	±0 frame (TC)
Tape Timer Accuracy:	±1 frame (continuous CTL)
Servo Lock Time:	Within 0.5 sec (colour framing/standby ON)
Video
Sampling Frequency:	Y: 13.5MHz, PB/PR: 6.75MHz (DVCPRO50)
Quantization:	8 bits
Error Correction:	Reed-solomon product code
Compression Method:	DV-Based Compression (SMPTE 314M)
Compression Ratio:	3.3:1 (DVCPRO50), 5:1 (DVCPRO)
Bit Rate:	50 Mbps (DVCPRO50) 25 Mbps (DVCPRO)
[Digital In/Analogue Component Out] (standard)
Bandwidth:	Y: 25Hz to 5.5MHz ±0.5dB PB/PR: 25Hz to 2.5MHz ±0.5dB
S/N Ratio:	60dB or more (Y)
K Factor:	1% or less (Y 2T)
Y/PB, PR Delay:	10 nsec or less
Audio
Sampling Frequency:	48kHz (sync. with video)
Quantization:	16 bits
Frequency Response:	20Hz to 20kHz, ±1.0dB (reference level)
Dynamic Range:	More than 90dB (1kHz, emphasis off, "A" weighted)
Distortion:	within 0.05% (1kHz, emphasis off, reference level)
Cross Talk:	Less than -80dB (1kHz, between any 2ch)
Wow & Flutter:	Below measurable limit
Headroom:	18 dB
De-Emphasis:	T1=50µsec, T2=15µsec ON/OFF (Automatically switching)
Cue Track:	300Hz to 6kHz (±3dB)(DVCPRO50)
Video Input
Analogue Component:	BNC x 3 (Y/PB/PR),
(option)	Y: 1.0Vp-p, 75 PB/PR: 0.7Vp-p, 75 (100% colour bar)
Analogue Composite : (option)	BNC x 2 (loop-through), 75 On/Off, Video:1.0Vp-p(75)
Reference:	Analogue Composite BNC x 2 (loop-through) 75 On/Off
SDI:	BNC x 2 (active through), ITU-R BT.656-4
SDTI (option):	BNC x 1 with AJ-YAC930G, SMPTE 305M/321M
Video Output
Analogue Component:	BNC x 3(Y/PB/PR),Y:1.0Vp-p, 75 PB/PR: 0.7Vp-p, 75 (100% colour bar)
Analogue Composite:	BNC x 3 Video1/Video2: Video/WFM switchable Video 3: Superimpose on/off
SDI:	BNC x 3 (SDI1, SDI2, SDI3: Superimpose on/off), ITU-R BT.656-4
SDTI (option):	BNC x 2 with AJ-YAC930G, SMPTE 305M/321M
Video Out Adjustment Range
Video Gain:	±3 dB
Chroma Gain:	±3 dB
Chroma Phase:	±30°
Black Level	±100mV
Sync Phase:	±15 µsec
SC Phase:	±180°
Audio Input
Analogue(CH1/2/3/4):	XLR x 4, +4/0/-20 dBu switchable, 600/high-impedance switchable
Digital(CH1/2, CH3/4):	BNC x 2, AES/EBU
Serial Digital:	ITU-R BT.656-4 (BNC75)
Audio Output
Analogue (CH1/2/3/4):	XLR x 4, Low-impedance, +4/0/-20 dBu switchable
Digital (CH1/2, CH3/4):	BNC x 2, AES/EBU 1.0±0.2Vp-p, 75
Serial Digital:	ITU-R BT.656-4
Monitor:	XLR x 2, Low-impedance, +4/0/-20 dBu switchable
Phones:	M3, variable level control, 8
Others
IEEE 1394:	9 pin x 1, IEEE 1394-1995
TC IN:	XLR x 1, 0.5 to 8.0 Vp-p, 10K
TC OUT:	XLR x 1 low-impedance, 2.0 ±0.5 Vp-p
RS-422A IN:	D-sub 9 pin RS-422A I/F
RS-422A OUT:	D-sub 9 pin RS-422A I/F
RS-232C:	D-sub 25 pin RS-232C I/F
Parallel IN/OUT:	D-sub 25 pin
Encoder Remote:	D-sub 15 pin
Video Specifications with the AJ-YA932G Optional Analogue Input Board
[Analogue Component In/Component Out]
Bandwidth:	Y: 25Hz to 5.5MHz ±1.0dB 5.75MHz -2.0dB PB/PR: 25Hz to 2.5MHz ±1.0dB 2.75MHz -2.0dB
S/N Ratio:	55 dB or more
K Factor :	1% or less (Y 2T)
Y/PB, PR Delay:	20 nsec or less
[Analogue Composite In/Composite Out]
Bandwidth:	Y: 25Hz to 4.5MHz ±1.0dB, 5.75MHz (-3.0dB)
Y/C Delay:	20 nsec or less